Nikon Metrology Webinars

UPCOMING WEBINARS


PAST WEBINARS   

  • Look Inside Complex Parts with Industrial Computed Tomography (Nov 22, 2016).

Nikon Metrology industrial X-ray and computed tomography (CT) inspection systems gather internal and external dimensions with micron-level detail. Learn how these non-destructive inspection solutions can help refine your prototyping and manufacturing capabilities.

View recorded webinar

  • Medical Device Inspection Solutions: 101 (Nov 15, 2016).

As the Metrology industry continues to expand companies are finding themselves with a surplus of inspection solutions from stereo and compound microscopes, industrial confocal microscopy to benchtop SEM imaging devices. Each of these products has their strengths and weaknesses, making it difficult to decide which inspection solution will provide you with the competitive edge you have been searching for.

This webinar will provide you with an overview of the latest metrology techniques that are being used by medical device companies around the globe. We will then compare the advantages and disadvantages to each method, providing you with the knowledge you need to make the right decision for your application. This exclusive webinar as we explore the countless imaging techniques used to optically inspect medical devices in today's demanding market.

  • Explore the “Smaller World” with the new JCM-6000 Plus SEM (Nov 15, 2016).

The new benchtop scanning electron microscope, JCM-6000Plus NeoScope™, is designed to fulfill the diversifying needs of customers. The JCM-6000Plus is the third generation of the popular NeoScope benchtop SEM designed for convenience and ease of use. Nikon and JEOL have established a firm partnership in 2008 and this combination of experience and technology helps customers to obtain better insight in their products and finally increasing the daily productivity.

View recorded webinar

  • Insight into the inside with microfocus computed tomography (Oct 27, 2016).

In this webinar, we look at solutions provided by microfocus computed tomography (CT) such as: non-destructive inspection, full 3D internal and external visualisation, micron accuracy and structural integrity.

We’ll outline how X-ray and CT solutions can help to refine prototyping or manufacturing processes and explore the advantages of high flux microfocus X-ray sources, CT automation and configurable CT systems.

View recorded webinar

  • Laser Radar: The Next Generation CMM (Oct 4, 2016).

The Nikon Metrology’s Laser Radar system has become a proven solution for customers looking to upgrade from the traditional well known CMM. Companies are rethinking the speed and accuracy of their current large-scale inline inspection processes. The completely automatable Laser Radar system is a non-contact measuring device with up to a 50 meter range and accuracies similar to a horizontal arm CMM. Parts can be measured in the same location where they are manufactured shortening the trouble shooting process and saving both time and money.

Join us for this innovative webinar to learn about the next generation in CMM technology.

View recorded webinar

  • Introduction of New High Accuracy, High Speed Non-Contact 3D Gear Measuring System: HN-C3030 (Aug 18, 2016).

Gears are typically measured with contact scanning probes on either a dedicated gear measurement machine or on a 4-axis Coordinate Measurement Machine (CMM).

Until now! Nikon metrology has recently released the HN-C3030. A 5-axis, laser scanning, gear measurement machine. The HN-C3030 allows full measurement of teeth at much higher speeds than traditional gear measurement machines whilst retaining high levels accuracy. This full tooth measurement shows additional defects on the teeth, like cutter marks, that cannot be detected by contact probes and can lead to vibration, excess noise and wear.

  • Laser Radar: next-generation CMM for shop floor automotive BIW inspection (Apr 13, 2016).

Innovative inspection stations are being installed today, both lineside and offline, by major automotive OEMs using Nikon Metrology’s Laser Radar.

In this recorded webinar, we explain how the non-contact, automated Laser Radar is providing OEMs with an effective alternative to the shortcomings of CMMs and fixed inline camera systems for body-in white (BIW) and flush-and-gap inspections.

We outline the key features of Laser Radar, its ability to inspect almost any material, colour or surface texture and how it easily interfaces with most common industrial robots.

As OEMs continue to push the limits of automotive design with new shapes, materials and processes, Laser Radar meets the challenge with a high-speed solution, robust enough to be deployed directly on the factory floor.

View recorded webinar

  • Micro Computed Tomography inspects structural integrity of AM parts (Apr 6, 2016).

Metal Additive Manufacturing (AM) is frequently used today to produce automotive or aerospace components that require 100% failure-free operation.

Complex product designs use minimum amounts of material to lower component weights without sacrificing on structural integrity. AM also allows us to produce parts with complex internal structures (e.g. cooling channels) that are impossible to inspect with standard surface measurement techniques. Due to the expensive nature of these AM parts, traditional destructive inspection (e.g by slicing) is not an option for manufacturers.

View recorded webinar

  • Industrial micro-CT:  From the research lab to the production line (Feb 17, 2016).

Typically X-ray micro computed tomography (CT) has been seen as a slow process carried out in the research lab to evaluate failures or spot defects. It has never been fast enough to be used on a production line – that is until now! Recent advances in high-resolution high-flux rotating targets for X-ray sources, coupled with easy automation of CT scanning parameters and analysis techniques allow samples to be scanned, reconstructed and evaluated in under two minutes, opening many new CT applications.

View recorded webinar

  • Explore the “Smaller World” of the Automotive Industry with the JCM-6000 Plus SEM (Nov 12, 2015).

In the world of manufacturing today it seems as though everything is getting smaller and smaller. This presents a challenge for companies to not only produce but also inspect components at a microscopic level. For years many, metalworking and automotive companies have used traditional microscopes for inspection; however these microscopes are often limited by their resolution and depth of field. Companies are finding themselves turning to scanning electron microscopes to meet these demanding requirements.

View recorded webinar

  • Introducing CMM-Manager 3.5: Now available on iNexiv video measuring systems (Oct 8 & Oct 13, 2015)!

Expand your 3D tactile and video measuring capabilities with CMM-Manager, now available on Nikon iNexiv* video measurement systems.  CMM-Manager is task-oriented, highly intuitive and offers powerful measuring and reporting capabilities. This webinars introduces the main features for NEXIV video measuring systems such as collision-free CAD-based path definition, virtual path simulation and accurate feature measurement for both tactile and vision probing.

View recorded webinar

  • Increase Your Inspection Productivity with the All NEW InSight L100 Laser Scanner (Sep 1, 2015).

In this exclusive webinar featuring the InSight L100, Nikon Metrology’s Sales Development Manager, Alex Lucas, will display the versatile L100 in action. This special event will highlight the laser scanner’s capability to inspect parts quickly yet thoroughly in multiple applications, showing how this new product can help broaden your company’s inspection capabilities

View recorded webinar

  • Laser Radar webinar: “ See the Next-Generation CMM for shop floor BIW inspection” (Jul 28, 2015).

During this webinar our panel of experts will discuss the innovative approach Nikon Metrology has developed with the key OEM integration partners to decrease inspection time. 

View recorded webinar

  • X-ray webinar: “ See more with X.Tract” (Jul 7, 2015).

Nikon Metrology's X.Tract is a new X-ray electronics inspection tool that provides CT-quality results of complex, multi-layer electronics assemblies without slicing the board.

View recorded webinar

  • Enhance your production line with 100% CT inspection (Jun 25, 2015).

This webinar introduces the capabilities of production CT offering high level of automation, high throughput and minimal operator input. As an example, a CT system is presented that - based on QR-codes- identifies product series and allows to perform automatic acquisition, reconstruction and analysis with pass/fail sentencing.

View recorded webinar

  • Introducing the InSight L100 CMM scanner (Jun 23, 2015).

This webinar focuses on the capabilities of the InSight L100 to inspect sheet metal, plastics, cast parts and many other parts, -even with shiny or multi-material surfaces.

View recorded webinar

  • Unleash the power of high voltage computed tomography (Jun 17, 2015).

This webinar will introduce the unique high voltage x-ray technology and explain the advantages of using a microfocus source over a larger and less accurate minifocus source. Many target applications, such as cast engine parts or aircraft turbine blades, will be discussed with relevant CT images from a Nikon Metrology XT H 450 system.

View recorded webinar